Dein individuelles Flap für deine Massengerbag

Der Einsatz für die Lightspeed Ledertasche soll Ihnen helfen, das Innenleben Ihrer Tasche übersichtlich zu gestalten. Der Einsatz wird aus wasserabweisenden Polyester hergestellt und bietet ausreichend Platz für ein Headset, eine Kamera und andere notwendige Dinge. Der Einsatz bietet zudem gepolsterte, eingenähte Fachteiler, mehrere Zubehörfächer und gewebte Einbände zum optimalen Schutz der Kanten.  

In dieser Tasche lassen sich die notwendigsten Utensilien für Ihre Tour unterbringen. Der Innenraum bietet neben Ihrem Ordner mit Anflugkarten Platz für weitere Dinge wie Stifte, Flugbuch, Rechner, etc.. Die vordere Außentasche kann ein Headset aufnehmen. Die rückseitige Außentasche ist für Karten und Kniebrett gedacht. Kommt mit Schulterriemen. Gefertigt aus strapazierfähigem Nylongewebe, schwarz.

An infinitely-adjustable, insulated side pocket for any size water bottle from 0.5L to 1.5L.This SIDE POCKET ECHO is an infinitely-adjustable insulated water bottle pocket. It will securely hold anything from a small 0.5 liter size, up to a huge 1.5 liter size. The pocket can be adjusted to exactly the size of any container in that range. It takes the form of a neoprene sleeve that wraps around the water bottle and it secures with two clips on two straps. It makes for a perfect fit, regardless of the the size of the bottle, and it allows one-hand removal and replacement of the bottle.

This Main Handle comes with all of the pre-configured bags (The B2, B4, B6, B7, B10, B18, all come with one Main Handle.)  You also get a Main Handle if you order a separate Front Bag. But if you discover you need or want an extra handle, you can purchase it here.

Die Umhängetasche im ICAO-Karten-Design mit deinem Kartenblatt!

Die Markham Pilotentasche wird aus genarbtem und geöltem südamerikanischen Rinderleder in Handarbeit hergestellt. Die Tasche wurde von Lightspeed mit derselben Sorgfalt entworfen, wie Sie es von den Headsets her gewohnt sind. Die Tasche an sich ist in dunkel braun gehalten, die Außentaschenklappen sind als Kontrast in schwarz. Das Leder ist für einen authentischen Look unbeschichtet und wird, je länger die Tasche genutzt wird, immer geschmeidiger. Jedes Stück Leder hat seine eigene Narbung und Markierung, sodass jede Tasche ein Unikat darstellt, genauso wie der Pilot, der sie besitzt. Die Tasche bietet jeglichen Stauraum, die ein Pilot verlangt, wie z.B. spezielle Fächer für ein Headset, Tablet und Funkgerät. Weitere Produktmerkmale der Lightspeed Adventure Flight Bag - The Markham: Großes Stauraumfach lässt sich zum bequemen Befüllen weit öffnen. Eine Abbildung zeigt den Gebrauch der optionalen Organisationstasche. Das geteilte Front-Organisationsfach lässt sich ausklappen - für einfachen Zugang zu wichtigen Utensilien. Separate Tasche für das Funkgerät mit separater Antennenhalterung. Ein Reißverschlussfach auf der Rückseite bietet Platz für Tablets, Karten und andere flache Dinge. Eine weitere Außentasche ist so gestaltet, dass sie Platz für eine Trinkflasche bietet.

Qualitativ hochwertiges Kniebrett für das iPhone 6-8, sowie gängige 4"-5" Mobiltelefone anderer Hersteller aus umweltfreundlich erzeugtem Leder, mit breiter Klettbandhalterung, Klemm-Bügel, elastischer Schreibhalterung und PILOT CONTROLLER® KIT – Aufnahme. Zusätzlich bietet Ihnen die Anti-Rutschauflage einen optimalen Sitz des Kniebrettes. Im Inneren ist das Kniebrett mit einem weichen Mikrofaser überzogen das den Bildschirm zusätzlich schützen soll und einem Visitkartenfach.

Die Umhängetasche im ICAO-Karten-Design mit deinem Kartenblatt!

A specialized Rear End Cap that has Back Pack Straps built in. Carry your smaller configurations (B2 or B4) hands-free. Stow the straps when you don't need them.This specialized Rear End Cap turns any BrightLine Bag into a backpack (with limitations). This End Cap has backpack straps built in, but doesn’t look like a backpack when the straps are not in use. It's easy to deploy the straps in less than 20 seconds. And then it's easy to stow them when you don't need them. Now you have the ability to throw your (small) BrightLine Bag onto your back and use both shoulders to carry the load and be hands free when necessary. But there are obvious limitations. And because of these unavoidable limitations, we're referring to this as “The World’s Most Adequate Backpack”. We do not want people to start expecting that this new component is going to allow them to replace any normal backpack they may currently be using. But this new PACK CAP REAR will make it great for getting down Terminal C hands-free, or from their car, out across the tarmac to their plane. The first limitation is that the BrightLine Bag, to start with, is a pretty short bag.  It’s only 13.5” tall.  Most backpacks are much taller than that because it’s pretty far from the top of most people’s shoulders to a place near their waist line. So this PACK CAP REAR makes the BrightLine Bag into a very short backpack. If you’re tall then the bottom of the bag is going to hit you pretty high in the middle of your back. But if you’re a small person, then this setup will probably work much better. You will probably still use the SHOULDER STRAP most of the time, but there are times where it’s great to be able to whip out the backpack straps and put your BrightLine Bag onto both shoulders and be hands-free.The second limitation is that it really only makes sense to use this new PACK CAP REAR with narrow configurations like the B0, B2, and B4. Nothing bigger than that will work. If you tried to put a B7 FLIGHT configuration on your back, the length of the bag would cause it to cantilever away from your back and it would hang down hard and try to pull you over backwards. But for the smaller configurations, it’s hard to beat.

The CS5 was developed primarily for our IFR Flight Customers. By adding a CS5 to any configuration, you can now add IFR Binders and documents, without having to repack. In addition to IFR equipment, the CS5 is perfect for a couple days worth or clothes, two more sets of headsets, or a 13" laptop. The CS5 is 13.5" x 10.5" x 5". (And remember, it is a soft bag so it can expand slightly in every direction.) The CS5 can attach to all of the FLEX System modules. The CS5 makes a great bag all by itself. By adding end caps you now have an amazing carrying case. One might ask how they access all the equipment/clothes in the CS5. On the CS5 there is top level access. Simply unzip the top zipper, which is also a sunglasses holder, and reach down and grab your items This item does not include a Main Handle or Shoulder Strap. If building a custom bag, make sure your order includes one or both. The CS5 also comes with a divider shelf that is attached to the sidewalls of the compartment by use of Velcro on each end.  The velcro panels on the bag walls are quite large which allows you to move the divider shelf up and down to position the shelf right where you need it for your stuff (or take it completely out if you need). If you have the divider shelf installed, and if you're accessing the bag only from the top access, you won't (of course) be able to get those items underneath the divider shelf. To remedy this situation, (we did think of this occurance) we made it so that you can also zip open the entire rear panel of the module, thereby allowing you to grab all of the items inside, both above and below the divider shelf.  So the CS5 has both top AND side access.  Pretty cool. There are also two FLEX-Mount pocket stations on the outside of the bag, one on each side. You can install any two of your choice of the FLEX System side pockets onto the sides of the CS5 at these stations. The bottom of the bag has two plastic "skid plates" to help keep the bottom of the bag off the ground.

Dein individuelles Flap für deine Massengerbag

This licence cover is made of high-quality processed leather, with a silver metal swingarm at the front.It has 6 plastic covers inside for your pilot's licence, medical, etc., three credit card pockets, another compartment for papers and a visit card compartment.

Dein individuelles Flap für deine Massengerbag

Die Umhängetasche im ICAO-Karten-Design mit deinem Kartenblatt!

The elegant and understated metal Pilot Wings make the perfect gift.

The Pocket Cap Front mimics the front of the Front Bag. The Pocket Cap Front attaches to the CS2, CS3, CS4, CS5, and CS11. There are nine pockets on the outer surface of the Pocket Cap Front. You can plainly see three different pocket locations. Each of these three pockets pocket compartments actually contain three pockets: A main pocket area. This Main pocket area is designed to hold your mobile device, wallet and keys. A small secondary pocket tucked in the top of each pocket. This pocket is designed to hold a flashlight and fuel tester. And then a small flat pocket on the front cover of each pocket. This is designed to hold your electronic E6B, camera, business cards, iPod. These pockets are great for organizing all the little stuff in your personal and professional life. The Pocket Cap Front is not designed to be used alone because the separation zipper would be exposed and could be damaged. Always zip the Pocket Cap Front onto one of the other FLEX System modules. This item does not include a Main Handle or Shoulder Strap. If building a custom bag, make sure your order includes one or both. A great FLEX System option that works really well is to zip this Pocket Cap Front onto a Rear End Cap. This forms a configuration called B0 SLIM. This gives you a nice thin bag that is perfect for carrying your iPad, some documents, cords, cables, etc. It also turns out that the 13" Mac Book Air, and even the 13" Mac Book Pro will fit between these two End Caps. To carry the B0 SLIM, you'll make use the included Slim Handle which attach to the bag with the two small rectangular clips. These clips have a gap in them which allows you to thread them into the two small loops on the side of the Pocket Cap Front. (There are two more loops on the top of the bag as an option.) DO NOT CARRY ANY BAG BIGGER THAN THE PORTFOLIO WITH THE PORTFOLIO HANDLE. Always use the Main Handle when the Front End Cap is attached to any of the main modules.

The shoulder strap is adjustable and allows you to carry the different configurations over your shoulder.  The Shoulder Strap is curved so that it sits perfectly on your shoulder. It is also padded to make it more comfortable. The shoulder strap can fit any FLEX System bag.

Die Umhängetasche im ICAO-Karten-Design mit deinem Kartenblatt!

The CS2 is designed for carrying 13" laptops, iPads and assorted documents. This center section is 13.5” x 10.5” x 2" and it can attach to all of the FLEX System modules including other center sections. This item does not include a Main Handle or Shoulder Strap. If building a custom bag, make sure your order includes one or both. The CS2 can be used in any configuration and is not designed to be used by itself due to the possibility of damaging the exposed zippers. You will always want to have something (either another module or an End Cap) zipped onto both sides of the CS2 to protect the zippers. The smallest configuration is the B2, consisting of Pocket Cap Front, a CS2, and a Flat Cap Rear. However, the CS2 can be added to any configuration to add roughly an extra two inches of storage for your 13" laptop or other similarly-sized objects. Simply zip the CS2 into a B0 Slim to create a B2, or added to B4, B6, B7, B18 to get added storage for your 13" laptop, iPad, or folders and documents. The CS2 is padded on all sides. It is an adequate amount of padding for basic protection. It is not heavily padded, so you'll want to carry sensitive items with a normal amount of care.

The FLAT CAP REAR module offers two flat pockets on the outside, and one flat half-height slip pocket on the inner surface of the module. The primary outer pocket is accessed from the top and has a cover flap that is secured with Velcro.  This where you'll likely store your iPad (as long as it's not in a thick case), or a manilla folder or two for some documents, or a magazine.There is a second flat half-height panel on the outside surface of the first one, that has a zipper across the very bottom.  If the zipper is closed then this half-height panel acts like a pocket.  If the zipper is open then the opening at the bottom allows the telescoping tubes of a suitcase or folding cart to pass through and the panel serves to secure your bag to those tubes (especially when this FLAT CAP REAR is attached to other modules to form bigger bags like the B2 COMPUTE, B4 SWIFT or the B7 FLIGHT.There is also a flat half-height slip pocket on the inner surface of the module.  It has a cover flap secured with a spot of Velcro.  Here you can stow an important document or two, or any small flat item that you'd like to keep out of harm's way.The good news is that there is an identical-looking, yet opposite version, which is called the FLAT CAP FRONT. This opposite modules is always front-facing, so it will zip on the the front surfact of any module. The idea is that if someone wanted to, they could put a FLAT CAP onto both the front AND the rear of a configuration, thus giving a nice slim look to the bag.

Stabile und wasserfeste Schutzhülle für Flug- und Bordbücher

The Center Section Three offers 4 inches of storage and easily carries 13" laptops, some 14" laptops, tablets as well as documents, folders, clipboards, etc. Note - there are no side pocket mounts on the CS4.

Dein individuelles Flap für deine Massengerbag